Pages: [1] 
|
 |
|
 Author
|
Topic: finished my 88mm project, heres some pics (Read 2948 times)
|
Quik
Non Seller
T44
 Offline
Posts: 418
Location:
0
|
well lot of things have happend and some things have changed. But i did finish my setup. here is the run down... 2002 silverado RCSB, 2002 4.8ci, PT88 turbo, Self buit turbo kit, 4" downpipe and exhaust out side, 60# injectors, 60mm Tial wastgate, Alkycontrol dual nozzle meth kit, Tial 50mm BOV, LS2 intake, 241 heads, SCR of 8.8. ARP rod bolts, PRC dual springs, 230/236 595/601 115+2 turbo cam. its mated to a D&D viper spec'd T56 backed by a GM 14bolt with 488s [these were left over from my 408 NA build. future plans are to replace my blown up 408 with a new one and toss in a built 80e with this same kit. i also have a LPE 2 step. All work was done in my little 2 car garage http://videos.streetfire.net/video/Quiks-02-Silverado-Turbo_210579.htmmy fuel consists of twin 340s feeding a -8 and returning with -6 i have seen as high as 18psi with this combo. i have not yet dyno'd this combo since my one 340 died back in november and havent had chance to replace it yet. tune is safe at 11.0 with 18* timing. i run on 93 octane. my fuel cut off is set at 7600 rpms and i try to shift at 7k. its laggy but once in boost it pretty much stays there. in the video was first time out. i didnt launch well and didnt see full boost 9psi at the time till 3rd gear, then my clutch rod broke and i coasted to a 13.6 @ 88mph. it broke right before the 1/8 mile. since then i have did what i could to fix my issue with my clutch. my last attemp was swapping the master for another one. now this has allowed me to shift under boost instead of backing off and then granny shifting. the 4.8 if some of you going to question was tossed in cause money just wasnt there to rebuild my 408. so i bought a low mileage 4.8 and tossed it in to work the bugs out of my turbo kit and learn how to tune for boost. it seems to be working tho. the 4.8 loves the rpms and boost. i periodcally check my motor with a leak down gauge and still stays around 2% loss. not to bad for having 18psi thru it also the tracks here are closed till april and have been since Oct, so no times sinec then          http://videos.streetfire.net/video/Quik-02-silverado-88mm_182920.htm |
|
|
|
|
Logged
|
|
|
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
|
|
|
|
|
Logged
|
|
|
|
whiteghost
Classified Viewers
Offline
Gender: 
Posts: 209
Location:
|
Nice clean build! Any pics of your hotside? I really like the gloss black cold pipes  |
|
|
|
|
Logged
|
|
|
|
brngrhd
Newbie
Offline
Posts: 101
Location:
|
|
|
|
|
|
Logged
|
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
Nice clean build! Any pics of your hotside? I really like the gloss black cold pipes theres a thread on here little over a year ago, if you search youllsee my hotside being mocked up. its a 6 litre driverside manifold feeding into a 2.5" crossover into a 2.5" custom log manifold with a T4 flange. my wastegate is below the driver's floorboard and currently dumps |
|
|
|
|
Logged
|
|
|
|
|
Orr89rocz
|
Looking good man  Love that truck |
|
|
|
|
Logged
|
1989 Camaro 401 Twin Turbo
9.86 at 141 pump gas only
|
|
|
Wilde Racing
Non Seller
Offline
Gender:
Posts: 64
Location: Nevada
|
Looks Killer Quik.. So will the 408 be built later this year? |
|
|
|
|
Logged
|
2000 Silverado 1500 ecsb, STS GT-67 Turbo, ALKYcontrol, 4l80e, 05 front clip, Eaton LSD, Forged LQ4 373, HPTuners. Best times, 11.41@119 (with a stock LQ4)
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
thanks bud i see your new setup coming along. as for a 408, i cant say when to be sure. with this economy and no job at moment cant say anything for sure except going to push this little 4.8 for every once of power it can possibly make
|
|
|
|
|
Logged
|
|
|
|
reamo04
Classified Viewers
Offline
Posts: 778
Location:
|
FYI, your truck is sexy!
|
|
|
|
|
Logged
|
|
|
|
tunedports10
Classified Viewers
Offline
Gender:
Posts: 127
Location: Ft. Wayne, IN
|
Love the truck. Great job |
|
|
|
|
Logged
|
|
|
|
84tt monte ss
Non Seller
Offline
Gender:
Posts: 77
Location: ohio
|
Hey Quik, Your truck is awsome!! |
|
|
|
|
Logged
|
|
|
|
tricked-out-toy
Boost Junkie
Classified Viewers
Offline
Gender:
Posts: 198
Location: Nashville TN
|
Damn that is one CLEAN setup any numbers for it yet? |
|
|
|
|
Logged
|
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
no numbers yet but plan on something in near future.
|
|
|
|
|
Logged
|
|
|
|
one5oh2nv
Newbie
Non Seller
Offline
Posts: 56
Location:
0
|
Wow just saw a link to this very nice job!
|
|
|
|
|
Logged
|
|
|
|
Guillaume
Non Seller
Offline
Gender:
Posts: 53
Location: Montreal, Canada
|
nice work!!! where did you get that turbine blanket from? |
|
|
|
|
Logged
|
1995 Chevy Caprice
11.49 @ 116 mph with 1.54 60' time on nitrous
Twin turbo setup in the works!
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
nice work!!! where did you get that turbine blanket from? Jose from Forced Inductions it was a few bucks under 200 |
|
|
|
|
Logged
|
|
|
|
CyanJaguar
Classified Viewers
Offline
Posts: 860
Location:
|
is this a stock 4.8 going to 7600 rpms, or did you change out any of the internals?
|
|
|
|
|
Logged
|
" I race to win, I don't let up for anybody. I'll out run anyone I can. I don't think I would let up if my wife was in the other lane."
Buddy Ingersoll
|
|
|
GASOLINE
Non Seller
Non Seller
Offline
Posts: 37
Location: Atlanta
Man up, No Whining, Lets Race
|
....backed by a GM 14bolt.... Out of an SS454 or did you have axles made? I have not had much luck hunting a strong rearend/axles and a 5X5 pattern. |
|
|
|
|
Logged
|
Tom Willisford
|
|
|
Quik
Non Seller
T44
Offline
Posts: 418
Location:
0
|
is this a stock 4.8 going to 7600 rpms, or did you change out any of the internals?
rod bolts only change on bottomend. dual springs for keeping valves from floating also the 14bolt is from a 06 2wd SSS. the 454ss had different rear |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
|
