Pages: [1] 
|
 |
|
 Author
|
Topic: Tunerstudio not showing LC1 input correctly (Read 256 times)
|
|
dman
|
My MSII is working great, and i'm using turnerstudio but can't seem to get good a/f readings. It's like the whole scale is skewed. The gauge shows 10.1 when the engine is at 14.7. I have calibrated the a/f but no change
help
|
|
|
|
|
Logged
|
Go to Race Part Solutions V-Bands, Mandrel Bends, Silicone hoses, T-Bolt clamps, AN fittings, Thermo Tec, JGS Precision and Meziere water pumps 561.375.6277 |
|
|
|
|
|
Matt Cramer
|
Which of the LC-1's output wires is connected to the MS?
|
|
|
|
|
Logged
|
Matt Cramer DIYAutoTune.com tech support '66 Dodge Dart - turbocharged and Megasquirted |
|
|
|
dman
|
analog 1 goes to the MS and 2 goes to the LC1 db gauge (which reads correct).
|
|
|
|
|
Logged
|
Go to Race Part Solutions V-Bands, Mandrel Bends, Silicone hoses, T-Bolt clamps, AN fittings, Thermo Tec, JGS Precision and Meziere water pumps 561.375.6277 |
|
|
|
Matt Cramer
|
Ok, normally Analog 1 is in narrow band mode. Connect to the LC1 with the LM Programmer utility and set Analog 1's output curve to match the one Analog 2 is now using.
|
|
|
|
|
Logged
|
Matt Cramer DIYAutoTune.com tech support '66 Dodge Dart - turbocharged and Megasquirted |
|
|
|
dman
|
OK, thanks
|
|
|
|
|
Logged
|
Go to Race Part Solutions V-Bands, Mandrel Bends, Silicone hoses, T-Bolt clamps, AN fittings, Thermo Tec, JGS Precision and Meziere water pumps 561.375.6277 |
|
|
CW25
Sleeper Extraordinaire
Classified Viewers
 Offline
Gender: 
Posts: 2792
Location: Grande Prairie AB, way north of the 49th
Poor mechanic playin' a rich mans game.
|
Did you go into the TOOLS> CALIBRATE AFR. Make that match the output of the LC1 and it will read right.
|
|
|
|
|
Logged
|
Curtis 11.67@118 with 8 psi boost and 2400 DA 79 D100 + 400BB + S400 + MSII + roller cam = supurb drivability and mid 11s on pump gas  2007 Jeep SRT8 CAI and predator. Maybe mid 13s? |
|
|
|
dman
|
Did you go into the TOOLS> CALIBRATE AFR. Make that match the output of the LC1 and it will read right.
i did try that, no workie |
|
|
|
|
Logged
|
Go to Race Part Solutions V-Bands, Mandrel Bends, Silicone hoses, T-Bolt clamps, AN fittings, Thermo Tec, JGS Precision and Meziere water pumps 561.375.6277 |
|
|
|
Pages: [1] 
|
|
|
|
