MP T-70 In the 9's anyone?????

[RobR]

Hey creampuff , on both of are turbo cars we are running the 31x12x4 front mount A2A intercoolers ...!! On the coupe , we log all of the air intake temps on the runs and by 400 ft into the run the intake charge temps stay around 18-21 degrees of the outside ambient temps of that day ... the highest we've seen this late summer is around 116 degrees on the logs and that was a pretty hot day and we backed out alittle timng on that run .We are working on some Co2 spray coils that will spray a denser spray pattern over the complete intercooler to drop the air density into the 60 or 70 degree range to run a more agressive tune and make more power with lower boost setting ... We haven't giving up on the MP 70 turbo just yet , but we are having to come up with different ideas to make more effient power out of the MP 70 . I believe that with denser air charge temps and a .81 a/r housing , we should see a 9.50 pass before the years up ....... I'll keep you guys posted on the progress ......       Later  Rob.R

 PS! heres sum pics of my twin set up we just finished , and it's and all stock motor besides a 70 mm throttle body ........

[creampuff]

Thanks for the info. And the twins look good. I think we might have a boost leak then. We also log all passes with our fast, and we are at 160 degrees off the bottle and 120 on the bottle. But this is at 18 to 20 psi. What do you think?

[RobR]

Saturday , we had some time to drive to a 1/8 mile track and do some suspension testing and tried to run some low 6 second passes , but could not make more then 12# of boost due to a broken w/g spring .... But , here a vid of the testing and still running the .68 a/r housing on the MP 70 ............Car was running mid to low 1.30 short times .....

Heres the link to the vid ....

www.youtube.com/watch?v=-pJCKYsReaA
[/list]

[Unatural]

Looks like you got that suspension dialed in pretty good now Rob. Nice job.

[DaOnE51T]

Car looks good.

[Mike Gager]

bad ass looking car Rob!

[creampuff]

Nice job. How big is your intercooler?

[RobR]

Hey Shaun ,were running a 31x12x4 A2A with 3" inlet and outlet and it's a horizontal flow model ..... Sad to say , we had fun with the stock short block combo and a MP 70 turbo and never hurt any parts on the set up , but it's time to pull it out and get the car ready for the Dart block 331 and a 91 mm turbo for next year to run some 10.5 tire races in the area ..... Here a still shot of some air time .......

[Chris Derrick]

What Hp level is the 6al ignitions done? When is it time to update to say a 7 series or so? Just wondering. Chris

[Stroken331]

Yall have got that car dialed in for sure. It was good seeing you again to Robert. Now I want to see that car with the Dart blocked 331 you speak of..

[turbo418]

Yeah the new 331 and 91.5 should be fun...

[Mike Gager]

anyone know where is the best place to buy a master power t-70? i see a couple of the sponsors sell them any recommendations? im gonna be buying one this month with my bonus money from work

[notched306]

unless i read one of your posts wrong you said that the 90lx with twins was a 306 then you say its all stock motor except the 70mm t/b.i was just wondering.

[RobR]

The 90 lx with the twins belongs to me , Rob.R ..... The black coupe belongs to my son Chad and goes by Turbo418 on here .... We do own two running turbo stangs ......(LOL)

Yeah Mitch , it was good seeing you and your dad again at the track and hopefully you get your turbo car back together and tuned right and let her fly .... Anyways like i said at the track , if you need any help getting your tune set give me a call and i will help you out with it .....  Later  Rob.R

[turbo418]

Mitch nice car hope you get it together soon.

[RobR]

anyone know where is the best place to buy a master power t-70? i see a couple of the sponsors sell them any recommendations? im gonna be buying one this month with my bonus money from work

Give Veron a call at VS racing , he's a sponsor on the board here ..........

[Ryan]

Theres a guy on my local board that is running a MasterPower T70 on a 2 bolt production block and he is in the low 9s. He is looking to hit the 8's actually, and he is not too far off. I will post a link, and a vid.

http://www.tamparacing.com/forums/ford-tech/350297-my-data-page-cochese-pics-vids.html Info on the car, and some misc videos.

http://videos.streetfire.net/video/7ac0d46a-1a96-4bba-a3c2-9887017e34b2.htm His low 9 second run at like 152 mph.

He would have hit 8's but with some header failure, which I will not mention what company, he had to call it a day.

[Mike Gager]

maybe im blind today but i dont see where he says he has a MP T-70 in that thread. couple people ask him what size turbo but he never answers

[Turbo T/A]

Theres a guy on my local board that is running a MasterPower T70 on a 2 bolt production block

He runs a 76mm turbo,  not MP T70..........here's the info 

http://www.turbomustangs.com/smf/index.php?topic=73120.0

[4Jenna]

haha
figs

[n.o.s lx]

the fastest I could see a mp70 going is in the 9.60- 9.50 range. tops

[Ryan]

My fault, I thought I remember seeing he had the hotside coated and I thought I remembered it being a MP T70, I apologize.

[Mike Gager]

sort of off topic but does anyone know the fastest someone has went with stock e7s and stock cam with a mp t70?

[DaOnE51T]

sort of off topic but does anyone know the fastest someone has went with stock e7s and stock cam with a mp t70?

x2

[RobR]

Just wondering if anybody went any faster with a MP T-70 turbo only ( no nitrous) car this pass year ?????