Pages: 1 2 3 [4] 
|
 |
|
 Author
|
Topic: New Product Release- 2V, 3V and 4V Custom Turbo Cams by MMR Stages 1-3 available (Read 4956 times)
|
yoteehunter
Classified Viewers
 Offline
Posts: 663
Location: Lubbock, Tx
|
Im going through a NON PI 2v motor now. I was running the comp line of non pi cams they are the 264H (stage 2) cams for the earlier non pi head motor. I have ported and built up my non pi heads and want to stick with them. I was wondering if you offer cams for these older style heads or if I should just stick with my comps or just move to there 274H (stage 3). I know the lift is lower (around .500 I think) and I have 11cc pistons. I made good power as is but I was hoping to get the most I can out of this 2v before I switch to my 4v which I am also building with so far with your parts and notched pistons. Any help is appreciated.
|
|
|
|
|
Logged
|
|
|
|
|
|
|
Mod Mustang Racing
|
Im going through a NON PI 2v motor now. I was running the comp line of non pi cams they are the 264H (stage 2) cams for the earlier non pi head motor. I have ported and built up my non pi heads and want to stick with them. I was wondering if you offer cams for these older style heads or if I should just stick with my comps or just move to there 274H (stage 3). I know the lift is lower (around .500 I think) and I have 11cc pistons. I made good power as is but I was hoping to get the most I can out of this 2v before I switch to my 4v which I am also building with so far with your parts and notched pistons. Any help is appreciated.
Yes, we do offer the non PI style Turbo cams also, let us know how we can help! |
|
|
|
|
Logged
|
|
|
|
yoteehunter
Classified Viewers
Offline
Posts: 663
Location: Lubbock, Tx
|
Is there any way that you could email me cam specs for a "stage III" sohc non pi type turbo cam. Also The lift needs to be kept down under .540 maybe even less, I understand the lift makes power but my springs wont work with .550 lift on these heads. If there custom ground then it should not be a big problem anyways. I have brand new comp bee-hives and I dont want to buy any more, but from already trying .550 cams I broke springs after springs in these heads. Im looking for something similar to comps 274H cam. jamie92982@yahoo.comI guess show me what you got and we will go from there. |
|
|
|
|
Logged
|
|
|
|
|
|
yoteehunter
Classified Viewers
Offline
Posts: 663
Location: Lubbock, Tx
|
I got it thanks. After I get my comps sold I'll give you guys a shout, thanks for the quick reply.
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
99TTGT
|
Mark:
How high can you rev the stage III turbo cams 4 valve?
How do you modify the cam caps for the cams to clear?
Do you cut them off or grind them off?
Any pics?
thanks
|
|
|
|
|
Logged
|
babysitting turboland...
|
|
|
|
|
Chris98gt
Non Seller
Offline
Posts: 2
Location:
|
Will your stage 2 2v turbo cams work with my trickflow heads? If they will, do they still need notches or does the trickflow heads give enough clearance to not need notches? One last question, If the first two questions are a yes, then will the stock trickflow springs work with the your stage 2 cams? Thanks.
|
|
|
|
|
Logged
|
|
|
|
|
Mod Mustang Racing
|
They sure do and notches are not required, some early testing has shown some AMAZING results with the MMR cams and TFS heads!
|
|
|
|
|
Logged
|
|
|
|
Chris98gt
Non Seller
Offline
Posts: 2
Location:
|
That is great news! I saw in a post a while back that you were giving ttf members discounts on cams, do you still do that or was that just a limited time deal? either way, it'll be after the first of the year before I can order some cams anyway. Thanks.
|
|
|
|
|
Logged
|
|
|
|
|
Pages: 1 2 3 [4] 
|
|
|
|
